View C5300_557214.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

C5300
Typical Applications
Base Stations Test Equipment Telecom & Wireless Infrastructure Digital Switching
VCXO
Features
9X14 J Leaded Surface Mount Package Reflow Process Compatible Optional ACMOS, TTL and LVPECL
Previous Corning Model Numbers Frequency range
MC044, MC344, MC046, MC346, MC047, MC347, MC049, MC349, MC048, MC318, MC328, and MC348
1.0 to 800.0 MHz
(ACMOS/TTL available up to 125 MHz. LVPECL frequencies above 220 MHz are achieved through use of PLL or analog multiplier)
Standard frequencies Frequency stabilities1
Parameter vs. operating temperature range (Referenced to +25C) Supply voltage change vs. load change vs aging /1 Year vs. aging / year (following Years) Min 0 -45 -2 -1 -5 -1 Typ
19.44, 32.768, 44.736, 51.84, 77.76, 155.52, 622.08 MHz
Max. +70 +85 +2 +1 +5 +1 Units C C ppm ppm ppm ppm Condition Ordering Code C-xxx F-xxx
5
VS 5% Load 5%
3
Supply voltage (Vs)
Parameter Supply voltage Current consumption Min 4.75 Typ 5 Max. 5.25 15 20 40 100 Supply voltage Current consumption 3.135 3.3 3.465 6 8 12 16 60 100 Units VDC mA mA mA mA VDC mA mA mA mA mA mA ACMOS 1.0 to 14.90 MHZ ACMOS 15.0 TO 39.9 MHz ACMOS 40.0 TO 59.9 MHz ACMOS 60.0 TO 79.9 MHz ACMOS 80.0 to 125.0 MHz LVPECL No load ACMOS/TTL 1.0 to 23.9 MHZ ACMOS/TTL 24 to 49.9 MHz ACMOS/TTL 50 to 80.0 MHz LVPECL No load SV033 Condition Ordering Code SV050
5
RF output
Parameter Signal Load Signal Level (Vol) Signal Level (Voh) Rise and fall times for ACMOS (measured 10% to 90%) Duty cycle 45 40 TTL 10 4.5 3.0 10 5 3 55 60 Min Typ ACMOS 15 50 0.5 0.3 pF VDC VDC VDC VDC ns ns ns % % Vs= 5.0V and 15pF load Vs=3.3V and 15pF load Vs= 5.0V and 15pF load Vs=3.3V and 15pF load 1.0 to 23.9 MHz 24.0 to 79.9 MHz 80.0 to 125.0MHz @ 50% Vs< 15 MHz @ 50% Vs > 15 MHz RFT Max. Units Condition Ordering Code RFA
5
Signal Load
Vectron International, LLC
100 Watts Street Mount Holly Springs PA 17065
t 717 486 3411 f 717 486 5920
www.vectron.co m
C5300
Signal Level (Vol) Signal Level (Voh) Rise and fall times for TTL (measured 0.8V to 2.0V) Duty Cycle Signal Load Signal Level (Vol) Signal Level (Voh) Start-up Time Rise and fall times (measured @ 20% to 80%) Duty cycle LVPECL Jitter (rms) Period Jitter (pk-pk) 4.5 5 3 55 60 PECL/LVPECL 50 Vs -1.62 10 1000 600 55 60 5 1 40 0.5 VDC VDC ns ns % %
VCXO
Vs= 5.0V and 15pF load Vs= 5.0V and 15pF load 1.0 to 23.9 MHz 24 to 125 MHz @ 1.4V < 15 MHz @ 1.4V > 15 MHz RFP Into Vs-2V or Thevenin Equivalent
45 40
Vs- 1.025
45 40
VDC VDC mS ps ps % % ps ps ps
<100 MHz > 100 MHz @ 50% Vdd @ 50% Vdd BW = 10Hz to 20 MHz BW = 12 kHz to 20 MHz 10,000 samples- Rising edge
Frequency Tuning (EFC)
Parameter Absolute Pull Range Linearity Tuning Slope Control Voltage Range 0.5 0.3 2.5 1.65 Min Typ 30 50 10 Positive 4.5 3.0 VDC VDC with Vs=5.0VDC with Vs=3.3VDC 15 Max. Units ppm ppm % Condition Ordering Code AP033 AP050
Additional parameters
Parameter 3 Phase Noise Min Typ Max. -60 -90 -120 -140 -145 -50 -80 -110 -133 -145 Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz g 10 100 1 10 100 10 100 1 10 100 Hz Hz kHz kHz kHz Hz Hz kHz kHz kHz Condition Measured @ 52.00 MHz
Measured @ 155.52 MHz
Weight Processing & Packing 6 Output Enable
Handling & processing note Logic "0" input = Outputs disabled (Tri-state) Logic "1" or floating input = Outputs enabled) Logic "0" or floating input = Outputs enabled Logic "1" input = Outputs disabled (Tri-state) <2 Handling & processing note g
ACMOS/TTL Output PECL/LVPECL Output
Weight Processing & Packing
Vectron International, LLC
100 Watts Street Mount Holly Springs PA 17065
t 717 486 3411 f 717 486 5920
www.vectron.co m
C5300
Absolute Maximum Ratings
Parameter Supply voltage (Vs) Operable temperature range Storage temperature range Min Typ Max. 7.0 7.0 +85 +125 Units V V C C
VCXO
Condition Vs=5.0VDC Vs=3.3VDC
-55 -55
Enclosures
Type A - ACMOS/TTL
Package Codes: Code A1 Height H .368 max Pin Length L 1.09
Type B - ACMOS/TTL
Code B1 E2 = Enable/Disable pin 2 X = N/C pin 2 Height H .368 max Pin Length L 1.09
Pin Connections
1 2 3 4 Control Voltage Ground (Case) RF Output Supply Voltage 1 2 3 4 5 6
Pin Connections
Control Voltage Enable/Disable or N/C Ground (Case) RF Output N/C Supply Voltage
Type C - PECL/LVPECL
Vectron International, LLC
100 Watts Street Mount Holly Springs PA 17065
t 717 486 3411 f 717 486 5920
www.vectron.co m
C5300
Package Codes: Code C1 E2 = Enable/Disable pin 2 X = N/C pin 2 Height H .368 max
VCXO
Pin Length L 1.09
Pin Connections
1 2 3 4 5 6 Control Voltage Enable/Disable or NC Ground (Case) RF Output Complementary Output Supply Voltage
How to Order this Product:
Step 1 Use this worksheet to forward the following information to your factory representative: Supply Voltage Code Output Code APR Code Package Code Enable/Disable
Model C5300 Example Step 2 C5300
SV050
RFA
AP050
A1
E1
The factory representative will then respond with a Corning Model Number in the following Configuration: Model C5300 Package Code [Customer Specified Package Code] Dash Dash Number [Factory Generated 4 digit number]
Typical P/N C5300A1-001
Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C) 3 Phase noise degrades increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. 6 Contact factory for other options.
Vectron International, LLC
100 Watts Street Mount Holly Springs PA 17065
t 717 486 3411 f 717 486 5920
www.vectron.co m

▲Up To Search▲

Price & Availability of C5300

	To Download C5300 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .